Gutted! but needs must.
Massive clear out 'fire sale' from my many stashing places and sided project parts. business needs a 'cash injection' so combined with i just have'n the time to get my car together casuse i have to work my nads off.

so the following are up for sale :

2e block covered 80k [from previous car] fitted with g60 head [was rebuilt 4>5k ago, new seals, valves ground, reskimed, polished & ported] new head bolts and head gasket, never fitted in car. as is in picture; no cam , cover,
comes without engine stand
£150


pipper bp 285 cam bought new 4>5 k ago with adjustable pully [15bhp increase]
£150



set of 'venair' silcone hoses £30 SOLD


induction kit [delux[:y:] ] k&n filter, afm with modified k&n bracket & polished intake pipe [never fitted just dusty],
£50


techniclutch uprated 'fasts road kit' never fitted [good for 140/150 bhp] 8v gti £50


chiped [blitzchip remap +15bhp] ecu [digifant] 8v gti - £70


engine mounts new never fitted, solid front £20 rubber rears £10 each


strut braces - koni rear £40 SOLD - alloy front £25


new ball joints [19mm] [pair] £10


k&n breather filter £5


big bumper [fit to bodywork] £5


bonnet pins [never fitted] £5


g60 cam cover £30


head gasket £5



golf mk2 headlight nearly new condition £5



imobiliser never fitted £10 [2 of]


retro mirrors never fitted, very dusty £10


metal water pipe mk2 8v gti [fits right hand side as you look into engine bay, bolts to side of block] new never fitted, £15



very rare mk2 Golf front end, some of the mounts have been repaired [fibreglass], fits original mouting points on car, however slam pannel needs modification [removal of original headlamp holders] to fit, painted in matt black [wet look is water from damp cloth wipeover] is a little scuffed in places: never seen another 1 in the flesh last 1 i saw went for over £250 on ebay....
£150 [with out eybrow]
eyebrows [single & double headlamp] £12 each



pb [mk2 8v head] 80k miles but missing 1 bearing cap ok when removed £20


mk2 golf rear sreen & spoiler £25


blue igniters [8v] engines done about 10k good for about another 100k £25



mk2 golf headlight switch £5


mk2 golf hella spot £5


mk3 2e head [85k miles] £20, cam £10, cover £10, breather cover £3,


mk3 2e intake manifold part polished £25


central locking acuators [custom, mod to fit] £7.50


mk2 rocco rear light boards £2.50 each


mk2 mk3 polo [+other dubs] washer & header £5 for both


loads more pics to follow, including
mk2 golf:-
8v gear box - no 2nd gear cruch removed from 80k car -£40
new quickshift gearchange kit + set of new bushes - £30
millteck stainless manifold, -£150
milteck centre section > 2 ashley rear boxes, exhaust £75
audi handled doors - £60 for both
2 new, drilled & grooved rear disks, with new bearings & pads -£65



..................will add pics soon, and loads more goodies



all bit are located in Scarborough North Yorks,
can sort courier or post and do paypal. or petrol costs
mobile is : 07932 587866

would any of those rocker covers fit my 8v engine?

yes? however i think that the stud diameter on the mk3 heads are about 1mm wider and a poss a little longer [due to the ali cover being thicker than the steel cover].
I have some older heads with solid lifters kicking around somewhere from mk1 scirocco/golf; i'll do a trial fit [probably be sunday] and get back with a better answer.

G60 one should fit, you'll have to use the correct gasket though.

but for what reason?

i want a square rocker cover

they do look more gangster.

G60 Rocker covers are the sh*t loev the shape of em

so this will fit on my 8v?

you're using a mk2 PB head.

yes it will.

yes, i can confim that the cover will fit a pb head.
gaskets? the mk3 8v & g60 gasket, made of 'rubber' have smaller holes [i think that are reinforced with steel washers] are are struggle to get on [oh err missis] i have used the cork gasket with rubber half moons in the past with some sucess.....

I'm guessing the polo 8v will fit the same?

that's not the polo 8v cover there.

That's a 2E.

A polo 8v won't fit. Three bolts in the middle rather than around the outside for starters.

oh it said polo 8v on ebay. how gay.

so that one will fit in the pic?

The one in the pic will fit, the only real difference is the location of the oil breather and cap thing.